An HP Comware switch is controlled by a team of HP VAN SDN Controllers. The controllers have these roles within the region that contains the switch. Controller 1 = Master Controller 2 Primary slave Controller 3 =Secondary slave A failed network connection causes Controller 1 to lose contact with the switch. Controller 2 and Controller 3 can still reach all the controlled devices. Controller 1 is still up and has contact with other controllers and switches. How does the team handle this situation?
A. Controller 1 Customized Cardinals Jersey , as master, contacts OpenFlow-enabled devices near the switch and attempts to repair the connection. roller 2 becomes the master for this switch, although Controller 1 remains master for other switches. C. Controller 1 Cheap Cardinals Jersey , as master, removes the switch from any active flows and sends updated flows to Controller 2 andController 3. roller 2 becomes the master for all switches in the region, and Controller 1 becomes the primary slave for the region.
Answer: B
Question: 2
Refer to Exhibits:
The switch and server will transmit Fibre Channel over Ethernet (FCoE) traffic on the Ethernet link. If congestion occurs Hakeem Butler Kids Jersey , the devices should pause the FCoEtransmissions rather than drop them. What must the network administrator do on interface Ten-GigabitEthemet 102 to enable this behavior?
A. Enable Enhanced Traffic Selection (ETS) TLVs. gn the QoS policy as an inbound policy. C. Set the priority flow control no-drop queue to 802.1p3. igure queue3 as a strict priority (sp or groupO) queue.
Answer: C
Question: 3
Which technology is best suited for isolating tenants within a data center that must support many tenants?
A. TRILL
C. SPBM D. EVI
Answer: B
Question: 4
An HP Comware switch has four MDCs defined on it. Network administrators need to set up SSH access to each MDC and want to use the Management-Ethernet interface for that purpose. What is a valid configuration?
A. The same Management-Ethernet interface is assigned to each MDC. Each MDC assigns the same IP address to this interface. Management-Ethernet interface is divided into four subinterfaces, each of which is assigned to an MDC. Each MDC assigns a different IP address to its subinterface. C. The same Management-Ethernet interface is assigned to each MDC. Each MDC assigns a different IP address to this interface. Management-Ethernet interface is divided into four subinterfaces, each of which is